≡ Menu

New LEGO City & LEGO Friends Playmats

A few days ago, I ran across a video-review by JANGBRiCKS (see below) about a LEGO City Playmat I was not familiar with and found interesting. According to the Brickset database, both the #853656 LEGO City Playmat and the very similar #853671 LEGO Friends Heartlake City Playmat were released last year, but until seeing JANG’s recent review, I wasn’t aware of their existence. JANG liked the LEGO City Playmat, and I liked what I saw in the review, so I ordered a couple to give them a try. 🙂

LEGO has been releasing playmats at least since the late 1980s, possibly even earlier. They are usually made of cloth, paper, plastic, or cardboard. Many of them are quite large, and could be folded up for storage. Speaking of storage, some of the playmats even double as storage bags or boxes by either folding up the sides, or drawing the edges together with a string. The flat storage mats are most often double-sided to provide different terrain/road prints. LEGO playmats are a great way to provide a nice platform for a LEGO layout, or a perfect surface for play.

While the #853656 LEGO City Playmat and the #853671 LEGO Friends Heartlake City Playmat are made of cardboard, like some of the previously released playmats, they have one very unique feature; instead of being one foldable mat, they are made up of five connectable pieces.

Because the five pieces are printed with different terrains on both sides, and can be connected in a variety of ways, a single playmat set can provide over 50 layout variations! This makes the #853656 LEGO City Playmat, and the #853671 LEGO Friends Heartlake City Playmat the most versatile to date! You can use either side of the pieces, you can connect them on any of their sides, you can lay them out in one long and narrow surface, rectangle, L-shape, T-shape, or whatever else you like. The combinations are virtually endless, especially if you get a second of the same playmat set (which would allow you to use all ten different terrain prints at the same time).

Due to the playmats being made of separate pieces, they don’t need any folding creases for storage. This allows the construction to be made of very thick and sturdy cardboard that is non-bendable and basically feels like plastic. As mentioned above, both sides of the pieces are laminated with different terrain designs, so there are ten designs in each set. Even the edges are fully and seamlessly wrapped! The only place you can see that the pieces are made of cardboard is the inner edges of the square connector holes. This is high quality stuff that won’t get warped or easily damaged. Although I haven’t tried, my guess is that you can also wipe them down with a slightly damp cloth, in case they get soiled during play.

Each playmat piece measures 10×10 inches, or about 25×25 cm. The online description states they are over 9×9 inches, but they are in fact exactly 10 inches on each side, and are the same size as a standard 32×32 baseplate. As you will see in JANGBRiCKS video-review below, they can be placed next to 32×32 baseplates, however the height won’t match. You will need to place something under the thin baseplates to lift them up just a bit.

The playmat pieces each have four holes at the four corners, just to fit a 2×2 brick. The holes are used to connect the playmat pieces using standard LEGO bricks and plates. It’s a good system that works well, and the playmat pieces and regular LEGO elements blend together nicely.

Besides the five playmat pieces, the LEGO playmat sets also include about 100 standard LEGO elements. The most essential of these are the LEGO 2×2 bricks and various size plates to connect the playmat pieces. The bricks and plates can also be used to build columns to elevate some of the playmats, and thus create a sloping or elevated terrain. All the other LEGO pieces included are small accessories that can be added around the layout.

The road and other terrain designs on each of the playmat pieces are nicely printed. The colors used are not exactly the same as LEGO’s plastic pieces, but instead are meant to be more realistic. They do blend with LEGO elements nicely though. The #853656 LEGO City Playmat includes some straight road prints, curved road prints, off-road prints, and a parking lot. There is also a bit of grass, water, rocks, sand and even a little printed wooden bridge! The #853671 LEGO Friends Heartlake City Playmat is similar, with road sections, a grassy area, lake, beach, bridge, parking lot, etc. In the video review below, JANGBRiCKS will show you the #853656 LEGO City Playmat in more detail.

As you can see, these are high quality playmats that are plenty sturdy for kids to play on, and sophisticated enough to use as platforms for the dioramas of adult LEGO fans. While I like these playmats very much, there are a few minor cons that I should point out. The laminated surfaces are great quality, but they do show off oily fingerprints. You can wipe them off, but it is best not to handle them with oily hands. Another issue is that while both playmats that were released so far in this style are generic enough, the paved road section is darker in the LEGO City Playmat compared to the lighter road in the LEGO Friends Playmat. So, even though they are generic, they may not work so well with each other. If you would like to have a larger surface, I would suggest getting two of the same playmat designs, instead of one of each. I got two of the LEGO City Playmats and I’m very happy with them.

The last somewhat negative feature I can point out is not about the playmats, but about the boxes they come in. LEGO introduced a new box design in some of the newer sets, with an angled corner at one end (not the same but similar to the older LEGO Friends sets). I’m not sure what was the idea behind this shaping, but it makes the boxes much easier to crush accidentally as you stack them or handle them. Most LEGO fans will throw away boxes, especially for supplemental sets like this, but if keeping boxes in pristine condition is your thing, don’t grab these boxes from the slanted side. They easily bend and get creases.

Both the #853656 LEGO City Playmat and the #853671 LEGO Friends Heartlake City Playmat are $24.99 each, which means each of the playmat pieces are $5, which is $2.5 cheaper than a standard roadplate, or $3 cheaper than a plain 32×32 baseplate (when buying them directly from LEGO). I think they are a good value, especially since they are double sided with two different designs, and much more colorful and detailed than a standard baseplate or roadplate. I’m not sure how widely available these playmats are, as they are quite a unique item, but if you are interested, you can get them directly from the Brick Accessories section of the Online LEGO Shop.

What do you think? How do you like these LEGO playmats? Do you own any of them already? Or do you have other LEGO playmats either directly from LEGO or from third parties that you really like? Feel free to share your thoughts and own review in the comment section below! 😉

And you might also like to check out the following related posts:

{ 19 comments… add one }
  • Hayato January 24, 2018, 11:36 AM

    Looks interesting. I will check in our local store if they have them. I think the kids might like it.

    • admin January 24, 2018, 11:57 AM

      I would say that these are perfect for kids; sturdy, colorful, configurable, and easy to assemble. If you have a LEGO store near you, I definitely recommend checking them out. 🙂

  • brickmaster January 24, 2018, 11:49 AM

    I like that they are two-sided. Too bad that Lego discontinued the printed and raised baseplates. They were so good! These remind me of those old colorful baseplates.

    • admin January 24, 2018, 11:58 AM

      Oh, yes! I remember those baseplates! I really liked them too. Some of the high profile ones had issues with breaking, and they took up too much space in storage, but the low profile ones, like the moon base and the flat printed ones were great! 😀

      • Håkan January 24, 2018, 3:37 PM

        The crater plate is a classic!

  • kyttn January 24, 2018, 11:57 AM

    I am actually most tempted by the Friends playmat simply because we’re currently working on setting up a spring playground area, and I like the grassy background and bushes. What I’d really like is something with more water features or a river available for all the elves sets that have water features. I simply don’t have enough water-coloured bricks (or know-how yet), to make a good waterway connecting things.

    • admin January 24, 2018, 12:03 PM

      There is a really beautiful LEGO Elves playmat that you might consider. It is the older style that folds out, but it is still very good quality. It is two-sided with a pretty landscape and small river on one side, and a wide river’s mouth with more water on the other side. It is no longer available from LEGO directly, but you can get it on Amazon: https://www.amazon.com/LEGO-NA-851341-Elves-Playmat/dp/B00UUC5HUG/ref=as_li_ss_tl?ie=UTF8&linkCode=sl1&tag=thebriblo-20&linkId=6d3799590bdb9ce8acd5d5068a5a667e

      • Håkan January 24, 2018, 8:25 PM

        And it seems you need to buy two of them, so you can get the whole picture!

        • admin January 24, 2018, 8:29 PM

          Yeah, that was the other reason I got two; so I can use all the different designs at once. 😉

      • kyttn January 25, 2018, 12:38 PM

        It’s lovely, but I can’t justify $60 for a playmat 🙁

        • admin January 25, 2018, 12:46 PM

          Yeah, when something gets retired, prices do go up. But look for it. you may find a good deal if you are patient. The original price was $15. I’m also hoping that LEGO will release an Elves-themed playmat in the new style. WE can’t count on this, but Elves is still very popular, so there is some chance. 🙂

  • A Stark January 24, 2018, 1:41 PM

    I recently bought the City playmat for my nephews (9, 6, and 3) and watched them play with it for the better part of a day. It’s well made, and I was impressed at how the pieces of the mat interface with Lego bricks. They seemed to find it easy to create all sorts of different configurations. This set goes well with set 40170, a city accessory set. It would also be nice to have two or more of these sets to use together–5 is a bit of an odd number.

    • admin January 24, 2018, 1:46 PM

      Thanks for sharing! Glad to hear your nephews enjoy the playmat! I also thought five was a little weird number for the pieces as you can’t make a full rectangle with just one kit. That’s one of the reasons why I bought two. 😀

  • Håkan January 24, 2018, 3:44 PM

    Hmmm, if this is a cheaper option to bulk up a sizable collection than the older roadplates, they might be useful.

    I have a bunch of 80’s roadplates found cheaply on thrift shops, myself, although I don’t really have any useful place to put them for building a city, anyway…

  • Icepacklady January 24, 2018, 8:09 PM

    My daughter has the Friends one. She wishes the water and beaches were done differently.

    • admin January 24, 2018, 8:29 PM

      Hm… your daughter might consider changing the water and beaches with some LEGO pieces. Plates and tiles would work well. 🙂

  • Håkan June 30, 2018, 8:04 AM

    There’s also been three more mini-sets produced in 2018 with two two-sided playmats each.

    https://brickset.com/sets/theme-Xtra

    • admin June 30, 2018, 5:18 PM

      Interesting! Looks like they rebranded them as Xtra, and only include two plates per package. The one I got has five.

Cancel reply

Leave a Comment