≡ Menu

Guide to feeling for The LEGO Movie minifigs

(Written by William)

The Collectible LEGO Minifigures are back this year, but instead of random minifigs from various themes, this time they are all characters from The LEGO Movie. There are 16 different minifigs to collect and there are 60 minifigures in a full box, just like in previous series. And of course here we are also getting the blind baggies, so you could either pick some up at random, or use the feeling-guide below to get the ones you want. I have to admit there are some minifigs in this series that are really hard to tell apart. But let’s begin and see what we can find! 🙂

Shop for The LEGO Movie Minifigures

The LEGO Movie Abraham LincolnThe LEGO Movie Abraham Lincoln: The stove-pipe top-hat is a dead give away. It may throw you off a bit feeling the squishy beard at one end, but the hat is so tall it’s hard to miss. Also, if you feel the 2×2 tile, try to then look for the hat to identify this minifigure. There are 4 Abraham Lincoln minifigs per full box, so he is fairly common.

The LEGO Movie Calamity DroneThe LEGO Movie Calamity Drone: The 2x2x2 slope is an obvious first choice when you start looking for her. However, since Wildstyle also has a dress with the same slope element, you’ll need to try locating the shotgun. It’s the longest accessory in the entire series, so it’s quite unique. There are only 2 of these minifigs per full box, so she is one of the rarest in The LEGO Movie series.

The LEGO Movie GailThe LEGO Movie Gail the Construction Worker: Those with a decent sized LEGOCity collection should be familiar with her jack-hammer.  It’s roughly a “T” shape with a boxy middle. Her hard-hat is unfortunately not distinct enough to focus on despite the hair being built into it. There are only 2 of these minifigs per full box, so she is also very rare.

The LEGO Movie EmmetThe LEGO Movie Hard-Hat Emmet: This is one of the minifigures that can get a little difficult to identify. First locate the 1×2 tile. Only the Police Officer has one like it. Now you’ll either have to make sure there are no handcuffs, or that his helmet is textured and not smooth. It’s up to you to decide whether or not you trust your fingers to identify that much detail. Take your time with this one. He is one of the most common minifigs, with 6 in a full box.

The LEGO Movie LarryThe LEGO Movie Larry the Barista: Due to the plain nature of this minifigure, he can be a bit tough to pin down. You want to find the cup first. It feels like a 1×1 round brick with a slight lip on one end. It will be notably smaller than a minifigure head. Just make sure it is not President Business’s coffee mug. There are 4 of these minifigs per full box, so he is quite common and you should be able to find one.

The LEGO Movie MermaidThe LEGO Movie Marsha Queen of the Mermaids: It’s all about the mermaid tail with this one. It will be one of the bulkier pieces you come across. It can take some time to orient it properly to make sure you got it right. All the other pieces are distinct too, but take much more time to identify than the tail does. There are only 2 mermaids per full box, so finding her is going to require some effort.

The LEGO Movie Cat LadyThe LEGO Movie Mrs. Scratchen: She does have the largest hair piece in the series, but feeling for hair in general equates to asking for trouble and misidentifying the minifigure. So it comes down to feeling for the cat. If you got the Grandma from LEGO Minifigures Series 11, you can practice identifying it. Otherwise at first it will probably feel like a minifigure torso to your fingers. Which of course means that if you feel like you found two torsos than it is most likely this minifigure in the bag. There are only 2 of these minifigs per full box, so she is very rare also.

The LEGO Movie PandaThe LEGO Movie Panda Guy: His round bulbous head feels like too many other head pieces in the series. So you will need to find the toy bear. It’s the same mould as the teddy bear from previous series, like with the Christmas Elf and Sleepy Head. You’ll have to find an oddly textured piece roughly the size of a finger tip, and make sure it has two little arms. It may feel to some a little like a LEGO bat, but with smaller wings. There are 6 Panda Guys per full box, so he is very common.

The LEGO Movie Lord BusinessThe LEGO Movie President Business: Chances are you will run across his hair and get stuck on trying to figure it out. It’s square enough to feel like so many brick shapes you’re used to, but the hair piece quality throws a wrench in its identification. So stick with the mug. It’s simple and it has a handle. This is also a common minifig, with 6 in a full box.

The LEGO Movie Good CopThe LEGO Movie Scribble-Face Bad Cop: The 1×2 tile is your first goal to find. Then move straight to the handcuffs. His helmet is too smooth and round to get a clear feel for it. Stick with the accessories since after the 1×2 tile you will either have him or Emmet. Bad Cop in another common minifig with 6 of them appearing in a full box.

The LEGO Movie Taco GuyThe LEGO Movie Taco Tuesday Man: This is the easiest minifigure to find in The LEGO Movie series. Both his dish and hat are wide and round. Look for one of these two accessories and your job is done. There are 4 Taco Men in a full box of minifigs, so he is quite common and you shouldn’t have a problem finding him.

The LEGO Movie Lady RobotThe LEGO Movie Velma Staplebot: She is another minifig that is hard to pinpoint as she doesn’t come with much. You will want the 2×2 tile as a starter. Then her only other unique element is her round hair.  Just make sure it’s not William Shakespeare or Abe. William will have the ruffle and Abe will have the top-hat. There are only 2 of these minifigs in a full box, so she is one of the rare ones.

The LEGO Movie Pantless GuyThe LEGO Movie Where Are My Pants Guy: The difficulty with finding this guy is that we typically ignore parts like legs when we try to identify minifigures. But that is what makes this minifig unique;  he has two sets of legs. This means you’ll want to do a body-check of any minifigure that’s giving you identification problems. There are 4 of these guys in a full box, so he is fairly common.

The LEGO Movie WyldstyleThe LEGO Movie Wild West Wyldstyle: This is the other lady with the 2x2x2 slope. Her identifier is the fan. You’ll probably think flat fin when you find it. Just make sure there’s no shotgun, otherwise you will have the Calamity Drone. Wyldstyle appears 4 times in a full box, so you should be able to find her.

The LEGO Movie Dinamite RobotThe LEGO Movie Wiley Fusebot: This guy has a mess of unique elements. The dynamite is a good piece to find, but so is the pistol or the beard piece. The pistol is tied with the mermaid’s gem for smallest piece in the series that is three dimensional. The beard feels like a small oddly shaped ring. Even his coon-skin hat has a rubbery feel to it that could remind you of a long ponytail. There are 4 of these minifigs also in a full box.

The LEGO Movie ShakespeareThe LEGO Movie William Shakespeare: The 2×2 tile is the highly recognizable piece for this minifigure. Of course two others also have a 2×2 tile so you need to find the neck-ruffle.  If you got a Sad Clown or Hamlet from previous series then you know what to look for; it’s a round ring with a lot of texture. You shouldn’t mix it up with Wiley Fusebot’s beard if you found the tile first. Only 2 of these minifigs appear in a full box, so finding him requires some luck.

The LEGO Movie Minifigures

One way to quickly identify the above mentioned parts and accessories is to first shake the baggies so that all small parts fall into one corner. This way you can identify them quickly. It is also a good idea to have a printout of the minifigures with accessories that you can look at as a reference while you are searching for the minifigs you want. You can go through a whole box of Collectible Minifigures quite quickly following these simple methods, and as a bonus you will also improve your tactile skills! 😀

Shop for The LEGO Movie Minifigs

Hope this helps with hunting for The LEGO Movie minifigures! They should be available at all LEGO retailers and are also listed at the Online LEGO Shop. If you have your own tips and tricks on identifying them feel free to share in the comment section below! 😉

And you might also like to check out the LEGO Minifigures section for more news, reviews and discussions, or choose from the following posts:

{ 49 comments }

The Great LEGO Ball Contraption…

(Written by Philip Verbeek)

My name is Philip Verbeek from the Netherlands. I’m 18-years-old and a LEGO fan. My specialty is making LEGO GBCs (Great Ball Contraptions). Today I would like to show you my latest project, the LEGO GBC-8. Maybe it will inspire you to make your on LEGO GBC on day. I even have the instructions available for download, if you are interested! 🙂

LEGO Great Ball Contraption by PV-Productions

This is not the first time I have made a LEGO GBC, in fact this is my 8th design. Some of my past LEGO GBCs included ball-launchers, ramps, elevators, grabbing claws, and more (see my website). This time I wanted to add even more, so the GBC-8 comes with elevators, moving ramps, and an undulating bridge. I also incorporated the LEGO NXT that allows me to track data about system-performance and control the whole thing with an Android app. See video below of how it all works!

Some fun facts about the LEGO GBC-8: I used over 2000 LEGO pieces and 2 XL motors (one for all the modules and one for the air-pump). The mechanical energy from the motor is transmitted to most of the modules via gears, or a network of strings woven through the bricks.

LEGO Great Ball Contraption Overview

I also used the LEGO NXT, so I can control the LEGO GBC with my smart-phone and wirelessly turn it on and off (a mechanical control-switch is added as well). The LEGO NXT is also used for measuring data; you can see the balls that have passed by, the average amount of balls per second and a clock to see how long the GBC has been running.

LEGO Great Ball Contraption from Above

Here is a list of mechanisms and functions of the LEGO GBC-8. Please note that not all of them have official names, so I just named them by the function they perform:

  1. Stop-Go Mechanism #1: Stops the balls and let them go by at the right time.
  2. Sinusoid: Moves the balls by making a sinusoid motion.
  3. Stop-Go Mechanism #2: Stops the balls and let them go by at the right time.
  4. Elevator: Lifts the balls to a higher level every time 3 balls can fit in the cabin.
  5. Bridge: Leads the balls of the yellow tower to the blue tower. When the elevator is down the bridge will go up and when the elevator is up the bridge will go down
  6. Stop-Go Mechanism #3: Stops the balls and let them go by at the right time.
  7. Vertical Pushers: Pushes the balls in a vertical way up.
  8. Color-Sensor: Takes measurements of the balls.
  9. Ball-Pump: Pumps one ball up at a time.
  10. Android App: Controls the LEGO GBC.
LEGO Great Ball Contraption Side View

If you are interested in building a LEGO Great Ball Contraption, you can download the building instructions for the GBC-8 on my website. Here is the link: Download GBC-8 Building Instructions. You can also check out my website for my previous LEGO GBC designs: PV Productions Website

LEGO Great Ball Contraption Instructions

Also, if you would like LEGO to make a Great Ball Contraption set, you can support my project on LEGO CUUSOO. If it reaches 10,000 votes, LEGO may consider making it an official LEGO set.

Great LEGO Ball Contraption on CUUSOO

So how about you? Have you ever built a LEGO GBC before? Are you considering it? Do you have any questions? Feel free to share in the comment section below. Thanks for reading! 😉

And you might also like to check out the Featured LEGO Fans and Featured LEGO Creations section for more inspiring LEGO projects.

{ 28 comments }