The #21314 LEGO Ideas TRON: Legacy set is going to be available in a few days, and LEGO was kind enough to send us an early review copy so we can take a closer look. The LEGO TRON: Legacy project was originally submitted to the LEGO Ideas platform by brothers Drew and Tom (a.k.a. BrickBros UK) from Devon, England. After achieving 10,000 votes, the model was selected by the LEGO Ideas team to become the next official LEGO Ideas set. So, let’s see how it turned out. 🙂

Those of us who have been fans of the movie and the corresponding LEGO project have been eagerly waiting for the revelation of the finalized set. And, when the teaser-trailer was released a few days ago, we got several very pleasant surprises. First of all, the LEGO Ideas TRON set isn’t just including one Light Cycle, like in the original submission, but two! This has been a question and concern of fans of the project ever since it was approved. Will we only get Sam’s bike and we will have to build Rinzler’s by buying a second set and customizing it? Drew and Tom actually had a second LEGO Ideas project with Rinzler’s bike, but that project did not achieve enough votes to go under review. However, it seems like the LEGO Ideas team was very much aware of what fans wanted, and they ended up giving us both Light Cycles!

And with two bikes, we also need two riders. So, instead of just getting a Sam Flynn minifigure, we also get Rinzler, and… huge surprise… Quorra! For those who are not familiar with the movie, TRON: Legacy (released in 2010) is the sequel to the 1982 cult classic sci-fi movie, TRON. The film follows Sam Flynn, who responds to a message from his long-lost father Kevin Flynn, and is transported into a virtual reality called the Grid. Here, Sam, his father who is trapped in the Grid, and the algorithm Quorra must stop the malevolent program Clu from invading the real world. Those inside the Grid wear cool black outfits with colored light-strips, carry Identity Disks, and race superfast Light Cycles. There is more information about the movie and the characters in the booklet that comes with the LEGO Ideas set.

I’m a big fan of the TRON: Legacy movie, and always find it exciting to see LEGO fans attempting to recreate the Grid, the Light Cycles, and the characters from the film. The Light Cycles are particularly challenging models, especially when made minifig-scale. They need to be small, sturdy, sleek and emanate (or have the illusion of emanating) light. Drew and Tom did an excellent job recreating Sam’s Light Cycle by using black and translucent-light-blue elements. Because LEGO’s translucent pieces are particularly sparkly, they give a really nice glowing effect even without the addition of electric components. However, this original model was mostly meant for stationary display and wasn’t really sturdy enough for play.

When the project was approved, LEGO Senior Designers Junya Suzuki and Samuel Johnson teamed up to transform the original submission into an official LEGO set. They changed the design slightly to make it more sturdy, and also smoothed down some of the lines and curves by taking advantage of recently released elements. And, they also added playability by making the wheels roll smoothly. Then, LEGO Graphic Designer Mark Tranter stepped in to create the awesome printed wheel pieces, printed Identity Disks, and the minifig body designs. Again, you can read more about the design process and the LEGO designers who worked on the project in the booklet that comes with the LEGO Ideas set.

Now, let’s take a closer look at what’s in the #21314 LEGO Ideas TRON set box. The box itself is quite small; the same size as the #21110 LEGO Ideas Research Institute from 2014. Inside the box, there are two numbered bags. The first bag includes the parts to build the TRON grid/display-stand for the bikes and the three minifigures, and the second bag includes all the parts for both bikes. And, of course, there is also the instruction booklet with information of the LEGO fans who originally submitted the set, the LEGO designers who refined it, and the movie. Interestingly, this is the first LEGO Ideas set I have built that doesn’t include a brick-separator.

The display-stand is pretty simple, using black and medium-azure plates, and black and translucent-light-blue tiles. One notable feature is that instead of just using standard plates, LEGO also included four 4×6 tiles with studs around three sides. As this is a fairly new piece, it’s nice to see them added here, even though they were not needed.

The surface of the display-stand is almost completely smooth, except for four black jumper-plates, which are used to attach the bikes (or, they could also be used for the minifigs). I will note here that because the bikes are quite substantial, two studs for each bike are just not enough to keep them attached to the display-stand securely. I have experimented with different configurations, and found that six studs are ideal for attaching the bikes. I have added four additional jumper-plates for each side of the stand. A four-stud configuration is also pretty good, so you may try that too, but in my experience, six provides the best balance between sturdiness and still being able to remove the bikes easily.

As I mentioned above, pieces for building the three minifigures are also found in the first bag. Sam and Quorra are built the same way; legs, torso, translucent-clear neck-bracket with two studs for attaching the Identity Disks, head, and hair. Both minifigs come with dual-sided heads with smiling faces and stern faces, and Sam also gets a helmet with a translucent-light-blue visor, while Quorra is equipped with a sword (with an extra one included as a spare piece).

I have to say that I’m not entirely happy with Sam’s helmet. It’s too round, and doesn’t have the characteristic sloping back. However, I can’t think of any other currently available LEGO helmet that would work better, and LEGO does not produce new parts for LEGO Ideas sets. The final solution ultimately works okay, although if a better helmet comes along in the future I will look into replacing it.

Another feature I’m not happy about with Sam and Quorra is the translucent-clear neck-bracket piece. It makes the attached Identity Disk stick out too much, and the connection looks unnatural. I don’t know why LEGO didn’t just use a standard black neck-bracket with one stud. I have already replaced both translucent-clear neck-brackets with standard black ones. Looks so much better in my opinion (picture below: Sam’s neck-bracket replaced, and Quorra with original clear neck-bracket).

The body printing on both Sam and Quorra is gorgeous. The front and back of the torsos are fully printed, as well as the arms and the front of the legs. Sam even has printing on his feet. The white, light-blue, and gray lines are sharp, and make the printing look like it’s glowing. Really beautiful.

Rinzler is built similarly as Sam and Quorra, but there are differences as well. His head only has one-sided printing, and his neck-bracket comes with a larger single pin to accommodate two disks (Rinzler is the only one in the film who has two Identity Disks). While I did not like the supplied neck-brackets for Sam and Quorra, the one for Rinzler works perfect. And, then, there is that helmet… oh, my! It is actually a re-colored Iron Man helmet (also used for a number of other Super Hero characters), and although it is not an exact replica of Rinzler’s helmet, it works very well. It is black, shiny, and super cool, with two thin silver stripes, and two small orange marks. Perhaps the orange marks could have been a bit more pronounced, but other than that, this helmet is awesome.

Rinzler’s torso is fully printed front and back, but not the arms (a little disappointing). The front of the legs is printed as well. I would say that his printing is not as effective as the printing on the other two minifigs. Just like on the helmet, the orange highlights are not pronounced enough, and therefore don’t have that great glow effect as Sam and Quorra’s outfits. Still nice, but not as nice as the other two.

The second bag includes all the parts for the two Light Cycles. The instructions tell you to build Rinzler’s orange bike first, then Sam’s blue one, but since they are identical, you could build them at the same time, if you prefer. Each bike is basically made up of three parts (center, front, and back) that clip together with LEGO Technic pins to form the body.

There is some good usage of small parts that were introduced recently to add interesting details; 1×1 round plates with bar on the side, 1×1 round plate with bar on top, corner slopes, 1×2 gold bars in black, to name a few. Both bikes are prominently black, with a little bit of light-gray here and there. This works well, except for the handlebars. I think they look better in black.

The highlights on Sam’s bike are medium-azure and translucent-light-blue, and on Rinzler’s bike orange and translucent-orange. Both combinations work exceptionally well and give the bikes a real glowing effect. This is highlighted by the attached translucent banners at the end. This is a very simple, but very effective solution. When you look at the bikes from certain angles, they really look like flying through the Grid.

The most outstanding and visible feature of the Light Cycles is the wheels. The graphic designer did a stellar job on these, using beautifully printed circles of silver, medium-azure (or orange), black and white, applied on translucent-light-blue and translucent orange 4×4 dish pieces. They really add the final touches to the set.

The Light Cycles are sturdy. Nothing is falling off or flimsy. The wheels are attached with a simple short rod (lightsaber blade) through a LEGO Technic pin. If you don’t push the wheels in fully, they can turn freely. Frankly, I don’t think it’s so important for the wheels to turn, but it’s nice that the option is available. The minifigs simply hover in their cockpit and are attached only by the handlebars. It’s a bit finicky to position the hands just right to grab the handlebars, but once they are attached, the riders aren’t going anywhere. I kind of feel bad for Quorra though, as she can’t join the boys in all that racing fun, but I’m glad that she is at least included.

I haven’t noticed any particularly unique building techniques or parts, but building the bikes was nonetheless a fun and satisfying experience. According to the box, the set is recommended for LEGO fans 10+, but if a six-year-old is interested, they should have no trouble building it. I would compare the process to building a LEGO Ninjago bike or other smaller vehicle. The entire set took about 45 minutes to put together, and that was with me taking notes for this review.

All in all, this is a solid set, and as a TRON fan, I’m super happy with it. In fact, it is better than I expected, mainly due to the inclusion of two Light Cycles, additional minifigures, and beautifully printed parts. There are some minuses that I have discussed above, but they are either minor, or can be easily fixed. I’m sure most LEGO fans will get this set as a display piece (would look striking on a white shelf, or in front of a TRON poster!), but it is nice that LEGO designers also thought about making it sturdy enough for play. Below are a few more pictures of the finished build.

Here is the official description of the set, and below is the designer video: Build, play and display with this futuristic #21314 LEGO Ideas TRON: Legacy set from Disney, featuring 2 Light Cycles, each with minifigure seats and translucent-colored light-style elements, plus a divisible TRON grid with attachment points for the vehicles. Use the grid as a display-base for the Light Cycles or split it in 2 to recreate the chase scene from Disney’s TRON: Legacy movie. Alternatively, stage an Identity Disc battle between the 3 included LEGO minifigures – Sam Flynn, Quorra and Rinzler – on the grid. This construction toy includes a booklet with information about its fan creator and LEGO designers, plus the lowdown on Disney’s TRON: Legacy movie and its main characters. Each Light Cycle measures over 1″ (5cm) high, 6” (17cm) long and 1” (4cm) wide. TRON grid/display-base measures over 8” (22cm) wide and 3” (9cm) deep. 230 pieces. Price: US $34.99 – CA $44.99 – DE 34.99€ – FR 34.99€ – UK £29.99 – DK  300DKK (Euro pricing varies by country). Available for sale on March 31st, via official LEGO stores or the Online LEGO Shop.

What do you think? How do you like the LEGO Ideas TRON: Legacy set? Were you looking forward to this model? How do you like it compared to the original submission? And what do you think of the minifigures and the Light Cycles? Feel free to share your thoughts and own review in the comment section below! 😉

And you might also like to check out the following related posts:

• LEGO Ideas Latest News & Updates
• LEGO Ideas Moments in Space Building Contest
• LEGO Ideas Ship In A Bottle Press-Release
• Fun with the LEGO Ideas Old Fishing Store
• LEGO Ideas Tron: Legacy Set Coming & More!